What’s happening
A refrigerator that won’t seal lets cold air escape and warm air in. This drives up energy use, causes condensation and frost, and makes the compressor work overtime. The fix is usually quick and inexpensive.
Common causes
- Worn or torn door gasket — the rubber seal has hardened, cracked, or deformed.
- Misaligned or sagging door — hinges need adjustment so the door sits square.
- Damaged mullion — the center seal strip on French-door and side-by-side models is faulty.
- Dirty gasket — debris keeps the seal from closing tight.
- Overloaded shelves or bins — items block the door from fully closing.
What FridgeFix checks and fixes
We inspect the gasket, hinges, and mullion, adjust door alignment, and replace worn seals with the correct part for your model. We confirm a tight seal all the way around before finishing.
How long it takes and what it costs
This repair usually takes 30-45 minutes and runs $120-$260 in Orange County. We confirm the price before any work begins.
Refrigerator repair across Orange County
We serve Irvine, Anaheim, Costa Mesa, Huntington Beach, Santa Ana, and surrounding cities. See our refrigerator repair service or book online.
Frequently Asked Questions
Close the door on a dollar bill - if it slides out easily, the gasket is weak. Other signs are condensation or frost inside, the motor running constantly, and the fridge feeling warmer than it should.
A poor seal lets warm, humid air in. That makes the compressor run longer, raises your energy bill, causes frost and condensation, and shortens the appliance's life. Replacing the gasket restores efficiency.
Sometimes a dirty or slightly deformed gasket can be cleaned and reshaped, but a cracked, torn, or hardened seal should be replaced. We'll advise the most cost-effective fix.